 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| INTERNATIONAL+ LINEARS INTERNATIONAL+ LINEARS FEATURES * World-wide AC input ranges and safety standards * Industry standard packages * UL/CSA TUV/IEC approved--68 models to UL1950; CSA C22.2 No. 234 L3; TUV certified to IEC950 * Burn-in with cycling; 3-year warranty * Capacitors have highest CV & ripple current ratings * * * * * MTBF 200,000+ hours per Mil Handbk 217D (most units) All electrolytic caps rated at 105C Transformer insulation meets Class F (155C) Exceed FCC and CISPR22 Class B conducted emissions marked to LVD SPECIFICATIONS AC Input 100, 120 and 240Vac: +10%, -13%; 215Vac: +12%, -11 %; 47 to 63Hz. Tolerance for 230Vac operation is +15%, -10%. Derate output current 10% for 50Hz operation. DC Output See voltage rating chart. Adjustment range 5% minimum except HA series. Line Regulation 0.05% for a 10% change. Built-in on all 5V models, set at 6.2V 0.4V. Other models use optional overvoltage protection. Remote Sensing Provided on all models; open sense lead protection built-in (except HA series). Stability 0.05% for 24 hours after warmup. Temperature Rating 0 to 50C full rated, derated linearly to 40% at 70C. Load Regulation Output Ripple 0.05% for a 50% load change. 3mV +0.05% of output voltage, peak to peak maximum. All "3-terminal regulator" outputs: 3mV +0.2% peak to peak maximum. Temperature Coefficient 0.01%/C maximum. Transient Response <50 microseconds for 50% load change. Efficiency 5V units: 45%; 12 and 15V units: 55%; 20 and 24V units: 60%. Logic Inhibit and Current-Share F & G models. Short Circuit Protection Automatic current limit/foldback. Overvoltage Protection Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc. 2311 Statham Parkway, Oxnard, CA 93033 * 800-235-5929 * 805-486-4565 * FAX 805-487-8911 * www.condorpower.com/ 54 Model (Single) HA2-1.5-A+ HB2-3-A+ HC2-6-A+ HN2-9-A+ HD2-12-A+ HE2-18-A+* HA5-1.5/OV-A+ HB5-3/OV-A+ HC5-6/OV-A+ HN5-9/OV-A+ HD5-12/OV-A+ HE-18/OV-A+* F5-25/OV-A+* G5-35/OV-A+* CP197-A+* HA15-0.9-A+ HB12-1.7-A+ HC12-3.4-A+ HN12-5.1-A+ HD12-6.8-A+ HE12-10-2-A+* F15-15-A+* (12V) HA15-0.9-A+ HB12-1.7-A+ HC15-3-A+ HN15-4.5-A+ HD15-6-A+ HE15-9-A+* F15-15-A+* HA24-0.5-A+ HB24-1.2-A+ HC24-2.4-A+ HN24-3.6-A+ ND24-4.8-A+ HE24-7.2-A+* F24-12-A+* HA24-0.5-A+ (28V) HB28-1.0-A+ HC28-2.0-A+ HN28-3-A+ HD28-4-A+ HE28-6-A+* F24-12-A+* (28V) HB48-0.5-A+ HC48-1-A+ HD48-3-A+** HE48-4-A+* F48-6-A+* Voltage 2V 2V 2V 2V 2V 2v 5V 5V 5V 5V 5V 5V 5V 5V 5V 12V 12V 12V 12V 12V 12V 12V 15V 15V 15V 15V 15V 15V 15V 24V 24V 24V 24V 24V 24V 24V 28V 28V 28V 28V 28V 28V 28V 48V 48V 48V 48V 48V Current 1.5A 3A 6A 9A 12A 18A 1.5A 3A 6A 9A 12A 18A 25A 35A 50A 0.9A 1.7A 3.4A 5.1A 6.8A 10.2A 16A 0.9A 1.5A 3 4.5A 6 9 15A 0.5A 1.2A 2.4A 3.6A 4.8A 7.2A 12A 0.5A 1A 2A 3A 4A 6A 10A 0.5A 1A 3A 4A 6A Case B B C N D E B B C N D E F G G B B C N D E F B B C N D E F B B C N D E F B B C N D E F B C D E F Model (Dual) HAA5-1.5/OV-A+ HBB5-3/OV-A+ HCC5-6/OV-A+ HAA512-A+ HBB512-A+ HCC512-A+** HAA524-A+** HBB524-A+ HCC524-A+ HAD12-0.4-A+ HAD15-0.4-A+ HAA15-0.8-A+ HBB15-1.5-A+ HCC15-3-A+ HDD15-5-A+* HAA24-0.6-A+ Output 1 5V@1.5A 5V@3A 5V@6A 5V@2A 5V@3A 5V@6A 5V@2A 5V@3A 5V@6A +12V@0.4A +15V@0.4A +12 to 15V@1A/0.8A +12 to 15V@1.7A/1.5A +12 to 15V@3.4A/3A +12 to 15V@5A +18 to 24V@0.4A/0.6A Output 2 5V@1.5A 5V@3A 5V@6A 9-15V@0.5A 9-15V@1.2A 9-15V@2.5A 18-24V@0.3A 18-24V@0.8A 18-24V@2A -12V@0.4A -15V@0.4A -12 to -15V@1A/0.8A -12 to -15V@1.7A/1.5A -12 to -15V@3.4A/3A -12 to -15V@5A -18 to -24V@1A/0.8A Case AA BB CC AA BB AA BB CC B B AA BB CC E AA **May require fan cooling. Model (Triple) HTAA-16W-A+ HBAA40W-A+ HCBB105W-A+** HCAA60W-A+ HCBB75-W-A+ CP131-A+ HDBB105W-A+* HDCC150W-A+* Output 1 5V@2A 5V@3A 5V@3A 5V@6A 5V@6A 5V@9A 5V@12A 5V@12A Output 2 +12 to 15V@0.4/0.4A +12 to 15V@1/0.8A +12 to 15V@3.4/3.0A +12 to 15V@1/0.8A +12 to 15V@1.7/1.5A +12 to 15V@1.7/1.5A +12 to 15V@1.7/1.5A +12 to 15V@3.4/3A Output 3 -12 to 15V@0.4/0.4A*** -12 to 15V@1/0.8A*** -12 to 15V@3.4/3A*** -12 to 15V@1/0.8A*** -12 to 15V@1.7/1.1A*** -12 to 15V@1.7/1.1A*** -12 to 15V@1.7/1.1A*** -12 to 15V@3.4/3A*** Case AA BAA CBB D CBB NBB DBB DCC *Requires fan cooling. **May require fan cooling. ***No. 3 output usable at -5V, rate at 1/2 of 15V current rating. DISK DRIVE/PRINTER SERIES Model CP206-A+ CP323-A+ Output 1 24V, 3A (3.5PK) 5V @ 2A Output 2 5V, 3A 12V @ 4A Output 3 5V, 1A N/A Case CBB BB FIXED DISK SERIES Model CP379-A+ CP498-A+ Output 1 +5V@6A +5V@6A Output 2 +24V@3.5/6A PK +24V@5/10A PK Output 3 -5 or -12V@1.2A -12V@0.5A Case NBB NBB *Requires fan cooling. **May require fan cooling. Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc. 2311 Statham Parkway, Oxnard, CA 93033 * 800-235-5929 * 805-486-4565 * FAX 805-487-8911 * www.condorpower.com/ 55 INTERNATIONAL+ LINEARS CC INTERNATIONAL+ LINEARS INTERNATIONAL+ LINEARS MECHANICAL SPECIFICATIONS: 3.00 [76.20mm] 0.25 [6.35mm] INTERNATIONAL+ LINEARS +OUT -OUT DC OUTPUT 0.450 [11.43mm] MAX. 0.25 [6.35mm] 4.00 [101.60mm] +OUT 4.125 [104.78mm] AC INPUT 4231 OVP-12 OPTIONAL -OUT S- [95.25mm] S+ 3.75 2.500 [63.50mm] [12.70mm] 0.25 [6.35mm] 0.35 [8.89mm] 0.500 MAX. 0.450 [10.16mm] MAX. AC INPUT 4231 [4.78mm] 0.188 DIA. MTG. HOLES 8PL 0.75 [19.05mm] 3.375 [85.72mm] 1.25 [31.75mm] 0.188 [4.78mm] DIA. MTG. HOLES 6PL 1.80 [45.72mm] MAX. [19.05mm] 0.75 A CASE (WT. 1LB.) B CASE (WT. 2LBS.) [4.78mm] 0.188 DIA. MTG. HOLES 12PL 0.25 [6.35mm] 0.450 [11.43mm] MAX. OVP-12 (OPTIONAL) 0.188 DIA. [4.78mm] MTG. HOLES 16PL DC OUTPUT -S +S +OUT DC OUTPUT +OUT S+ 0.25 [6.35mm] 0.625 [15.88mm] MAX. DC OUTPUT 3.100 [78.74mm] 4.88 [123.95mm] 0.25 [6.35mm] 1.63 [41.40mm] 0.625 DIA. [15.87mm] 2PL 5.63 [143.00mm] -OUT 0.25 [6.35mm] 2.50 [63.50mm] C CASE (WT. 4LBS.) Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc. 2311 Statham Parkway, Oxnard, CA 93033 * 800-235-5929 * 805-486-4565 * FAX 805-487-8911 * www.condorpower.com/ 56 S- OVP-12 OPTIONAL 4.875 [123.83mm] -OUT 1324 [123.95mm] 4.88 AC INPUT 4.125 [104.78mm] AC INPUT 4231 [7.62mm] 1.125x.550 [28.58x13.97mm] RECTANGLE .625 SQ. [15.88mm] 0.30 1.250 [31.75mm] 4.125 [104.78mm] 1.250 [31.75mm] 0.75 [19.05mm] 1.250 [31.75mm] 0.75 [19.05mm] MAX. 8.000 [203.20mm] 0.50 [12.70mm] 0.75 [19.05mm] 1.250 [31.75mm] 2.75 [69.85mm] 0.75 [19.05mm] 9.00 [228.60mm] 4.88 [123.95mm] D & CP510 CASE (WT. 7.5LBS.) INTERNATIONAL+ LINEARS MECHANICAL SPECIFICATIONS: OVP 24 OPTIONAL 0.25 [6.35mm] 1.58 [40.13mm] 0.725 [18.42mm] 1.125x0.550 REC [28.58x13.97mm] 0.625 SQ. 4.88 [123.95mm] 4.125 [104.78mm] 3.00 [76.20mm] 1.125x.775 REC [28.58x19.69mm] 0.625 DIA. MTG. [15.87mm] 2 PLCS 2.088 [53.04mm] DC OUTPUT -S -OUT +S +OUT AC INPUT 1.15 [29.21mm] 14.00 [355.60mm] 0.50 [12.70mm] 13.000 [330.20mm] 0.75 [19.05mm] 1.25 [31.75mm] 2.5 [63.50mm] 0..20 [5.08mm] MAX. 2.75 [69.84mm] 1.250 [31.75mm] 0.75 [19.05mm] 0.188 DIA. MTG. 16 PLCS E CASE (WT. 10LBS.) 0.218[5.54mm] DIA. MTG. HOLES (16 PLACES) D.C. OUTPUT 0.375 [9.53mm] 1.50 [38.10mm] MAX. 4.88 [123.95mm] 4.125 [104.78mm] 0.30 [7.62mm] MAX. 16.75 [425.45mm] 16.000 [406.40mm] 0.375 [9.53mm] 2.500 [63.50mm] 0.625 [15.88mm] CLEARANCE 3.50 [88.90mm] 2.500 [63.50mm] 0.625 [15.88mm] AC INPUT F CASE (WT. F5: 14LBS.; F15,24: 18LBS.)/G CASE (WT. G5: 19LBS.) 0.525 [13.34mm] MAX. 0.25 [6.35mm] D.C. OUTPUTS +OUT +S -S -OUT 0.188 DIA. [4.78mm] MTG. HOLES 16PL 0.10 [2.54mm] MAX LEAD PROTRUSION 0.156 [3.96mm] DIA. MTG. HOLES 4 PLCS. 4.125 [104.78mm] AC INPUT 4 2 3 1 5 1 J1 7 OVP-12 OPTIONAL 4.88 [123.95mm] 4.25 [107.95mm] F1 F2 1.250 [31.75mm] .75 [19.05mm] [31.75mm] [19.05mm] 1.250 0.75 6.250 [158.75mm] 0.375 0.030 [9.53 0.76mm] 2.75 [69.85mm] 1.70 [43.18mm] 3.750 [95.25mm] OUTPUT 3 V.ADJ. OUTPUT 1 V.ADJ. OUTPUT 2 V.ADJ. J2 0.25 [6.35mm] 5 1 0.25 [6.35mm] 2.750 [69.85mm] 3.25 [82.55mm] 7.00 [177.80mm] N CASE (WT. 7LBS.) L CASE (WT. 1LB.) Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc. 2311 Statham Parkway, Oxnard, CA 93033 * 800-235-5929 * 805-486-4565 * FAX 805-487-8911 * www.condorpower.com/ 57 INTERNATIONAL+ LINEARS 4 2 3 1 INTERNATIONAL+ LINEARS INTERNATIONAL+ LINEARS MECHANICAL SPECIFICATIONS: 4.00 [101.60mm] DC OUTPUT -OUT -S S COM 0.25 [6.35mm] 0.450 [11.43mm] MAX. 4.88 [123.95mm] DC OUTPUT -OUT -S S COM 0.450 [11.43mm] MAX. INTERNATIONAL+ LINEARS 6.50 [165.10mm] +S +OUT OVP-12 OPTIONAL 5.750 [146.05mm] 7.00 [177.80mm] +S +OUT OVP-12 OPTIONAL 6.250 [158.75mm] AC INPUT AC INPUT 4231 4231 [4.78mm] 0.188 DIA. MTG. HOLES 12PL 0.25 [6.35mm] 1.62 [41.15mm] 3.375 [85.73mm] [4.78mm] 0.188 DIA. MTG. HOLES 8PL 0.25 [6.35mm] 4.125 [104.78mm] 0.75 [19.05mm] 1.250 [31.75mm] 0.75 [19.05mm] 2.50 [63.50mm] 1.250 1.80 [45.72mm] MAX. 0.75 [19.05mm] [31.75mm] 0.75 [19.05mm] AA CASE (WT. 2LBS.) BB CASE (WT. 4LBS.) OVP OPTIONAL 0.188 DIA. [4.78mm] MTG. HOLES 16PL +OUT -OUT OUTPUT 1 1324 +OUT -OUT OUTPUT 2 0.25 [6.35mm] 0.625 MAX. [15.88mm] 10.25 [260.35mm] +S -S +OUT +S +OUT 4 2 3 1 COM S -S -OUT -OUT 0.25 [6.35mm] 0.450 [11.43mm] MAX. AC INPUT 4.88 [123.95mm] AC INPUT DC OUTPUT 4.125 [104.78mm] DC OUTPUT DC OUTPUT OVP-12 OPTIONAL 3.375 [85.73mm] 4.00 [101.60mm] 0.30 [7.62mm] MAX. 8.375 [212.72mm] 0.50 [12.70mm] 1.250 [31.75mm] 0.75 [19.05mm] 0.50 [12.70mm] 9.250 [234.95mm] 1.250 [31.75mm] 1.250 [31.75mm] 0.75 [19.05mm] 0.75 [19.05mm] 2.75 [69.85mm] 1.250 [31.75mm] 0.75 [19.05mm] 2.50 [63.50mm] 9.38 [238.25mm] [4.78mm] 0.188 DIA. MTG. HOLES 16PL CC CASE (WT. 7LBS.) BAA CASE (WT. 5LBS.) Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc. 2311 Statham Parkway, Oxnard, CA 93033 * 800-235-5929 * 805-486-4565 * FAX 805-487-8911 * www.condorpower.com/ 58 INTERNATIONAL+ LINEARS MECHANICAL SPECIFICATIONS: +S +S +OUT -S +OUT -OUT DC OUTPUT 4 2 3 1 COM S DC OUTPUT -S -OUT -OUT -S +S +S S -S DC +OUT OUTPUT 1324 +OUT COM -OUT DC OUTPUT 4.88 [123.95mm] AC INPUT OVP OPTIONAL 4.125 [104.78mm] 4.88 [123.95mm] AC INPUT OVP OPTIONAL 4.125 [104.78mm] 3.00 [76.20mm] 7.500 [190.50mm] 1.250 [31.75mm] 0.75 [19.05mm] 1.250 [31.75mm] 0.75 [19.05mm] 2.75 [69.85mm] 5.00 [127.00mm] 4.950 [125.73mm] 3.800 [96.52mm] 0.30 [7.62mm] MAX. 1.250 [31.75mm] 0.75 [19.05mm] 2.75 [69.85mm] 1.250 [31.75mm] 0.75 [19.05mm] 0.188 DIA. [4.78mm] MTG. HOLES 16PL 11.00 [279.40mm] CBB CASE (WT. 8LBS.) DBB CASE (WT. 11LBS.) DC OUTPUT +S +OUT +V ADJ. DC OUTPUT -S -OUT +S +OUT 0.25 [6.35mm] 0.625 [15.88mm] 0.625 [15.88mm] MAX. 0.25 [6.35mm] +S +OUT -OUT -S DC OUTPUT [4.78mm] 0.188 MTG. HOLES 16 PLCS -S -OUT S COM [123.95mm] -V ADJ. V.ADJ. 1324 AC INPUT 42 31 I.LIMIT 4.88 [123.95mm] 15.00 [381.00mm] 0.50 [12.70mm] 14.000 [355.60mm] 2.500 [63.50mm] 0.75 [19.05mm] 0.75 [19.05mm] 1.250 [31.75mm] 3.75 [95.25mm] 2.500 [63.50mm] 0.75 [19.05mm] AC INPUT 0.188 DIA. [4.78mm] MTG. HOLES 16 PLCS 4.125 [104.78mm] 4.125 [104.78mm] 11.00 [279.40mm] 7.000 [177.80mm] 0.50 [12.70] 0.30 [7.62mm] MAX. 2.75 [69.85mm] 1.250 [31.75mm] 0.75 [19.05mm] DCC CASE (WT. 12LBS.) NBB CASE (WT. 12LBS.) Condor D.C. Power Supplies, Inc./A subsidiary of SL Industries, Inc. 2311 Statham Parkway, Oxnard, CA 93033 * 800-235-5929 * 805-486-4565 * FAX 805-487-8911 * www.condorpower.com/ 59 INTERNATIONAL+ LINEARS 0.188 [4.78mm] DIA. MTG. HOLES 16PL 0.25 [6.35mm] 0.525 [13.34mm] MAX. 14.25 [361.95mm] 0.25 [6.35mm] 0.700 [17.78mm] MAX. -S -OUT S COM +S +OUT |
Price & Availability of HN24-36-A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |